Filter
Top Products
PAPER PATH PAPER LOADING
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 5-3
Paper Loading
Paper loading is a two-stage procedure.
1. The paper is loaded on the hopper.
2. The paper is autoloaded.
Loading on the hopper
To load paper in the hopper:
1. Remove the paper from the printer (see "Removing Paper" on page
5-12).
2. Check that the stacker components are in the following state:
• There is no paper left on the stacker table and the Table Auto
switch is set.
• The paper tension lever is set at a suitable position for the new
paper.
• The paper output lever is correctly set.
3. For paper supplied from a box, place the paper box under the hopper
and press it against the paper box guides.
• Turn the knob on the right-side guide to loosen it.
Hopper
Paper Box Guide
Paper Box
Paper Box Guide
Paper
Paper Registration Position
Right Side
Guide
Knob