Filter
Top Products
UNDERSTANDING THE TOUCH SCREEN PRODUCT OVERVIEW
Page 2-26 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Printer diagram
The Printer diagram is an animated representation of the printer.
The patrol lamp in the representation will indicate the status of the
machine.
• Off - The engine is powered off, part of the print line is in a not ready
state, the machine is warming up, in standby or in maintenance
mode.
• Green - All of the print line is in a ready state.
• Red flashing - The printer is in error.
• Green and yellow flashing - One of the consumables is in a low
state.
Press a closed door to open it and show the paper path behind that door.
If an error condition occurs, the doors in the printer diagram will
automatically open to show the location of the problem. Press anywhere
behind an open door to close all open doors.
START button - used to set the printer ready.
STOP button - used to set the printer to not ready.
Reset button - used for indicating that an error condition has been cleared.
This button replaces the START/STOP button.
Button Description