Filter
Top Products
DEFINING PAPER CHARACTERISTICS DEFINING PRODUCTION JOBS
Page 7-8 Xerox 495 Continuous Feed Duplex Printer Operator Guide
The Paper Dimensions screen is displayed.
5. Select the Length field, type in the length, then press the inch or mm
button according to whether you have entered the length in inches or
millimeters. However, you should be aware of the following
restrictions:
When printing to an internal stacker, the GUI range is from 7 to 14
inches (177.8 to 355.6mm) and you can choose one of the following
GUI options:
• Select the length As Mounted to use the dimensions of the
paper mounted at the time of printing.
• Enter a length that is equal to the length displayed on the
autoload panel.
• Enter a length that is a sub-multiple of the length displayed on
the autoload panel. For example, if the length on the autoload
panel reads 12, then you can enter a length of 4, 6 and so on.
When printing to a post-processing device, the GUI range is from 3.5
to 28 inches (88.9 to 711.2mm).
Enter your chosen value on the GUI. It does not need to comply with
the value on the autoload panel, once your value is within the
specified value range.
Avoid selecting the length As Mounted. It is not always accurate
when printing to a post-processing device.
6. Select the Width field, type in the width, then select the inch or the
mm button according to whether you have entered the width in
inches or millimeters. However, you should be aware of the following
restrictions:
The range is from 6.5 to 18 inches (165.1 to 457.2mm).
If you place a tick in the Paper Width Checked box, you must enter a