Filter
Top Products
DEFINING APPLICATIONS DEFINING PRODUCTION JOBS
Page 7-20 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Importing an application definition from the Production screen
The application definitions can all be amended from the Production
screen. You may want to create or amend the application definition from
the settings there.
To create or amend an application from a production application:
1. Select the Definitions tab, then the Application tab.
2. Press the button to import the application
parameters from the current Production screen. The parameters set
in the Production screen are then applied to the Application
screen. Importing is impossible if the application is in the process of
modification or if it has the same name as that on the Application
screen.
3. Press the button to save the current application.
The Save screen containing the list of existing applications is
displayed.
4. For a new application, select the Write As field, enter a name for the
application using the alphanumeric keyboard and press the Enter
button.
5. Press on the Save screen.
Note: When you press , you will be prompted to confirm
whether you want to replace an existing definition if it already exists.
Deleting an application definition
To delete an application definition:
1. Select the Definitions tab, then the Application tab.
2. Choose an Application from the pull-down list.
3. Press the button to delete the application.
The Delete screen containing the list of existing applications is
displayed. Press to delete the application or to exit
without deleting.
Note: You cannot delete the Default Application. Deletion is also
impossible if the application is referred to in a job. For this purpose,
the Jobs button can be used to list all the jobs to which this
application name is attached.