Filter
Top Products
GETTING STARTED SETTING PRINT MODES
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 3-9
indicated number. The printer will then stop, cutting the second
engine. After approximately. one minute, the printer will restart in
simplex mode and 1 page will be added each time to the counter.
• When a duplex job is received after a simplex job, the printer will
stop and then initialize the second engine. This can take up to 6
minutes. Once printing, 2 pages will be added each time to the
counter.
• If the value is zero, then simplex mode is disabled.
To set the print mode:
1. Select the Engine tab, then the Print Mode tab.
The Print Mode screen is displayed.
2. Check the boxes required.
If you check the Print Mode Switching Enabled box, press the
Number of Simple Side box and enter the number of pages to be
printed before switching into simplex mode.