Filter
Top Products
ERROR CODES PROBLEM SOLVING
Page 9-48 Xerox 495 Continuous Feed Duplex Printer Operator Guide
F0-AB Link not available 1. Select the Definitions tab, the Attachment tab, then the TCP/IP
tab on the touch screen.
2. In the Link box, select the appropriate link. Select only the link
that is currently indicated as “Present”.
3. Press the Save button to save the current line attachment
definition.
4. Press the OK button on the Save screen.
5. Press RESET on the touch screen and then set the printer to
ready.
F1-11 Paper size error 1. Select the Definitions tab, then the Paper tab on the touch
screen.
2. Choose the existing paper definition from the Paper pull-down
list.
3. Select the Paper Format field.
4. Select the Length/Width field, type in the correct length/width,
then select the inch or mm button.
5. Press the OK button to validate.
6. Choose the Paper Thickness setting from the circular list.
7. Press the Save button to save the current paper definition.
8. Press the OK button on the Save screen.
9. Press RESET on the touch screen and then set the printer to
ready.
F2-0B Invalid parameter 1. Select the Definitions tab on the touch screen and modify the
parameter, according to the upper/lower limits allowed.
2. Press RESET on the touch screen and then set the printer to
ready.
F4-0D Input attachment error 1. Record the displayed error code and message.
2. Press the RESET button to clear the error code.
3. Set the printer to ready.
4. If the problem persists, power the printer off then on.
5. If the problem persists, call for service or advice quoting the
error code number and message.
F4-0E Unknown attachment type 1. Record the displayed error code and message.
2. Press the RESET button to clear the error code.
3. Set the printer to ready.
4. If the problem persists, power the printer off then on.
5. If the problem persists, call for service or advice quoting the
error code number and message.
F4-0F Invalid emulation 1. Record the displayed error code and message.
2. Press the RESET button to clear the error code.
3. Set the printer to ready.
4. If the problem persists, power the printer off then on.
5. If the problem persists, call for service or advice quoting the
error code number and message.
F4-11 Invalid two channel switch 1. Record the displayed error code and message.
2. Press the RESET button to clear the error code.
3. Set the printer to ready.
4. If the problem persists, power the printer off then on.
5. If the problem persists, call for service or advice quoting the
error code number and message.
Code Display Message Procedure