Filter
Top Products
UNDERSTANDING THE TOUCH SCREEN PRODUCT OVERVIEW
Page 2-22 Xerox 495 Continuous Feed Duplex Printer Operator Guide
alignment condition changes the background pattern as follows:
Some Devices, such as an unwinder, have no alignment state. These
devices are always considered as aligned.
During a print position check (from start print position check till stop print
position check), the printer device is considered as not aligned.
Device name
For printers, this shows the printer name entered in the Engine>Config.
tab. For pre- and post-processing devices, this displays the name
entered Definitions>Line>Device tab.
Device icon
This illustrates a representation of the device type.