Filter
Top Products
PERFORMING ROUTINE MAINTENANCE REPLACING THE ROLLER UNIT
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 8-13
Replacing the roller unit
There is a counter linked to the life of both roller A and roller B. An Error
Code 03-01 or 03-03 is automatically displayed when either roller
reaches its theoretical replacement value.
Do not damage the guide roller surface of the roller unit. The roller unit is
a guide roller with a cleaner. The guide roller surface has a special
coating. Damaging the surface may result in dirty printing. Handle the
roller unit with great care.
CAUTION
Keep toner away from your eyes or mouth. If the toner gets on your skin
during replacement, immediately wash it off. Prolonged inhalation of
excessive amounts of toner particles may cause lung damage. If this
occurs, consult a doctor immediately.
Note: If you should get toner on your clothes, brush it off and wash the
item in cold water. DO NOT use hot water or dry cleaning as this may
make the mark permanent.
Replacing Roller unit A[R1a]
To replace Roller unit A[R1a], proceed as follows:
1. Press the button to switch to the consumables view which
shows the usage of all consumables and press the Change button
beside Roller unit A[R1a] in the Front box.
The consumables replacement screen for Roller unit A[R1a] will be
displayed.
2. Open the right and left printer doors and the internal door.
3. Pull out the lever of transfer unit A and lift it counter-clockwise to
open the transfer unit fully.
Transfer Unit A
Lever