Filter
Top Products
RUNNING PRODUCTION JOBS RUNNING JOBS
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 4-7
Notebook paper settings
The paper settings page of the notebook deals with the settings for the
different grades of paper and is shown in the following illustration.
Paper Size button - displays the paper size defined for the job.
Paper Thickness circular list - is used to choose the paper thickness
(thin or thick). An asterisk (*) is displayed to the right of the Paper pull-
down list for any modification to the paper thickness with respect to the
original configuration.
Notebook offsets
This page of the notebook deals with adjusting the page offset for each
marking unit. It is shown in the following illustration.
To save the changes you make to the offset in the Notebook, you have to
import them into the Definitions>Application>Main tab by pressing the
button to import the application parameters from the
current Production screen.
For each marking unit, Front A or Back B (see "Front and back
marking units" on page 2-2).
Offset arrows - are used to define the positioning of data on the page in
the direction shown by the arrow. For each click of the arrows, the offset
increments / decrements in units of 0.1mm or 0.01 inch in that particular
direction. An asterisk (*) is displayed to the right of the Application pull
Paper Thickness
Paper Size button
circular list
Offset display
Offset arrows
Offset unit buttons
Reset offset to zero button