Filter
Top Products
DEFINING APPLICATIONS DEFINING PRODUCTION JOBS
Page 7-12 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Defining applications
Note: To define an application you must have the User status of Key
Operator or higher.
An application definition determines the way that the printed data
appears on the page.
The Default Application configuration is as follows:
• Emulation pull-down list - IPDS
• Resolution cursor - 240
• Paper width checked box - Checked.
• Offset arrows - 0, 0.
•Density - level 1 is 8, 2 is 9, 3 is 10, 4 is 11 and 5 is 12.
• 2-up -None.
Creating or amending an application
Note: An asterisk (*) is displayed to the right of the Application pull-
down list for any modification made under the Production tab to any of
the settings on the screen.
To create or amend an application:
1. Select the Definitions tab, then the Application tab.
This tab provides access to four further tabs which allow you to:
• Set the application details.
• Set the image offset for both marking units.
• Set the image density steps and default.
• Set the conditions to print 2-up printing.