Filter
Top Products
QUICK START RUNNING PRODUCTION JOBS
Page 4-2 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Quick start
The following is a simplified method for starting a new job.
Note: You should follow the full procedures if you are new to the printer
or unsure of what to do.
1. Eject the paper and remove the completed job from the output
device if you want to use a paper different from the one currently
being used.
If the paper has been output to a pre- or post-processing device see
the appropriate user manual.
If you are feeding paper from a box or an unwinder that is not empty,
cut the paper (See “Cutting paper” on page 5-11.).
2. Load the paper (See “Paper Loading” on page 5-3.).
3. Select the print line that you want to use.
4. Select a previously defined job on the Production screen (see
"Running jobs" on page 4-3).
5. Check that the parameters shown on the screen are correct (see
"Running jobs" on page 4-3).
6. Set the Output Check value, if required (see "Setting the Check
Output value" on page 4-9).
7. Start printing.
8. Stop as soon as the first pages are printed and check the alignment,
margins and print quality.
9. Start the printer again after making any necessary adjustments.