Filter
Top Products
PAPER PATH CHECKING PRINTING
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 5-15
Check by the printing position check function
Feed prints from the printer into the stacker table and check the printing
status. After checking, return the paper to the original printing position
and restart printing from the page after the last confirmed print.
1. Print a necessary number of sheets for checking.
2. Open the bubble menu for the printer device and press the Start Print
Position Check command. Paper is forwarded to the stacker and the
stacker automatically lowers.
3. Check the printing status on the stacker table.
4. Press the stacker AUTO button to raise the stacker table.
5. Press RESET to set the printer to Not Ready.
6. Open the bubble menu for the printer device and press the Stop Print
Position Check command. The paper reverses to its original printing
position.
7. Press START to set the printer to Ready.
8. Resume printing.
Note: Before feeding the paper back, check that it is in the original
position on the stacker table. If the paper deviates, the paper may
tear or cause other problems. Make sure that the paper edge is
aligned with the “Align paper here” line.