Filter
Top Products
PAPER LOADING PAPER PATH
Page 5-4 Xerox 495 Continuous Feed Duplex Printer Operator Guide
• Press the right-side guide against the right side of the paper
box.
• Turn the knob to secure the right-side guide.
4. For paper coming from a pre-processing device, feed the paper to
the hopper.
Paper autoloading
Autoloading moves the paper from the hopper and positions it ready for
printing.
To autoload the paper:
1. Prepare the leading edge of the paper as shown in the following
diagram.
Note: If you get an autoload error repeatedly with the same paper, check
that the first perforation is not protruding too far. If so, flatten it a little to
ease the folding. Make sure, however, that the perforation is not too flat
or folded in the opposite direction because stacking performance or
other problems may occur.
Fold-out perforation
Fold back one sheet
Fold-out perforation
Paper weight below 82gsm
Paper weight above 82gsm
Paper edge
Paper edge