Filter
Top Products
PERFORMING ROUTINE MAINTENANCE REPLACING THE CLEANER BRUSH AND BLADE
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 8-21
15. Close the internal door, then the left and right printer doors.
16. Press the button on the right of the touch screen to confirm the
change and to return to the consumables view.
Replacing kit B[R3b]
To replace cleaner brush and blade kit B[R3b], proceed as follows:
1. Press the button to switch to the consumables view which
shows the usage of all consumables and press the Change button
beside Kit B[R3b] in the Back box.
The consumables replacement screen for Kit B[R3b] will be
displayed.
2. Open the right and left printer doors.
3. Check that the Kit B[R3b] LED is flashing.
4. Open the internal door.
5. Loosen the two thumbscrews at cleaner brush cover B[R3b].
6. Remove the cover and store it temporarily in a safe place.
7. Place the disposal bag (attached to kit B[R3b]) at the entry of the
Thumbscrews
Kit B[R3b] LED
Cleaner Blade B
Cleaner Brush cover B[R3b]
Drum Unit B
Cleaner Brush cover B[R3b]