Filter
Top Products
DEFINING A JOB DEFINING PRODUCTION JOBS
Page 7-6 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Importing a job definition from the Production screen
The job definitions can all be amended from the Production screen. You
may want to create or amend the job definition from the settings there.
To create or amend a job from a production job:
1. Select the Definitions tab, then the Job tab.
2. Press the button to import the job parameters from
the current Production screen. The parameters set in the
Production screen are then applied to the Job screen. Importing is
impossible if the job is in the process of modification or if it has the
same name as that on the Job screen.
3. Press the button to save the current job.
The Save screen containing the list of existing jobs is displayed.
4. For a new job, select the Write As field, enter a name for the job
using the alphanumeric keyboard and press the Enter button.
5. Press on the Save screen.
Note: When you press , you will be prompted to confirm
whether you want to replace an existing definition if it already exists.
Deleting a job definition
To delete a job definition:
1. Select the Definitions tab, then the Job tab.
2. Choose a Job from the pull-down list.
3. Press the button to delete a job.
The Delete screen containing the list of existing jobs is displayed. Press
to delete the job or to exit without deleting.
Note: You cannot delete the Default job or a job definition in use within
the Production screen.