Filter
Top Products
PERFORMING ROUTINE MAINTENANCE CHECKING CONSUMABLE USE
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 8-5
there is sufficient life remaining.
• Orange - means that the consumable is nearing its end of life.
• Red - means that the life of the consumable has expired. An error
message will be displayed and, to continue, you will have to replace
the consumable.
When several consumables need to be changed simultaneously,
there is no particular order for their replacement.
2. Press the Change button beside the consumable you wish to
change to display that particular consumable replacement
procedure.
3. For all consumables, with the exception of the Developer:
• You are not required to proceed through the instructions, page-
by-page, before confirming the consumable change. It is your
choice to read the instructions.
For example, if you have changed a particular consumable
before, you can ignore the instructions and proceed directly with
the change. All that the printer is waiting for is a final confirmation
as to whether or not you have changed the consumable.
• Confirm the change by pressing . This will return you to the
Consumables view where the value box will be reset.
• Cancel the change by pressing . This will return you to the
Consumables view where the value box will not be reset.
• To move forwards and backwards, page-to-page through the
consumable change procedures, click the active “Next page” or
“Previous page” links.
To change the Developer:
• You are required to proceed through the instructions, page-by-
page, before confirming the Developer change. Once you begin
the procedure, you will not be allowed to abort.
• There are 8 individual steps in the Developer replacement
procedure all of which have to be carried out in order. This
means that there are also 8 states for which the printer needs a
confirmation before proceeding from step to step. If you miss a
step but still confirm it, there may be an additional four steps
that need to be completed to ensure that the procedure is
complete.
• On pressing the button to confirm a step, you will move directly
on to the next step in the procedure. At the end, you will return
to the Consumables view where the value box will be reset.
• On pressing the button to cancel a step, you will return to the
last step of the procedure that wasn’t completed. Powering ON/
OFF the machine will not break this procedure. On powering
ON, you will still return to the last step of the procedure that
wasn’t completed.