Filter
Top Products
DEFINING APPLICATIONS DEFINING PRODUCTION JOBS
Page 7-16 Xerox 495 Continuous Feed Duplex Printer Operator Guide
setting.
When you select a contrast between 1 and 7, or between 13 and 15,
a warning icon will display to the right of the density level cursor. This
is because you have moved outside the default values, between 8
and 12.
Press the Default button to restore 1 to 8, 2 to 9, 3 to 10, 4 to 11 and
5 to 12.
10. Press the 2-up tab.
Note: The illustration above shows the 2-up selection for the front
side with the back side tab grayed out. When you click the backside
tab, the front side tab will be grayed out.
11. Choose the Forced 2-Up selection that you require.
Note: When changing from a 1-up job to a 2-up job, the printer must
be drained and the attachment disabled. This is because the
software 2-up capability is sent to the host at connection time. If the
host does not receive this indication, it will not be able to print the job
in software 2-up.
The Forced 2-Up selection affects the output. It is important that you
have a properly defined offset under the Main tab before doing fine
adjustment in this tab.
12. Press the page representation button repeatedly until the displayed
image shows the required disposition of pages on the sheet. The
choices are:
• Normal left to right
• Normal right to left
• Inverted left to right
• Inverted right to left
13. Press the arrows on the appropriate Offset button to enter the value,