Filter
Top Products
REPLACING THE CLEANER BRUSH AND BLADE PERFORMING ROUTINE MAINTENANCE
Page 8-18 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Replacing the cleaner brush and blade
There is a counter linked to the cleaning brush and blade life. An Error
Code 0A-03 or 0A-04 is automatically displayed when the counter
reaches its theoretical replacement value.
CAUTION
Keep toner away from your eyes or mouth. If the toner gets on your skin
during replacement, immediately wash it off. Prolonged inhalation of
excessive amounts of toner particles may cause lung damage. If this
occurs, consult a doctor immediately.
Note: If you should get toner on your clothes, brush it off and wash the
item in cold water. DO NOT use hot water or dry cleaning as this may
make the mark permanent.
Replacing kit A[R3a]
To replace cleaner brush and blade kit A[R3a], proceed as follows:
1. Press the button to switch to the consumables view which
shows the usage of all consumables and press the Change button
beside Kit A[R3a] in the Front box.
The consumables replacement screen for Kit A[R3a] will be
displayed.
2. Open the right and left printer doors.
3. Check that the Kit A[R3a] LED is flashing.
4. Open the internal door.
5. Loosen the two thumbscrews at cleaner brush cover A[R3a].
Drum Unit A
Thumbscrews
Cleaner Blade A
Cleaner Brush Cover A[R3a]