Filter
Top Products
RUNNING JOBS RUNNING PRODUCTION JOBS
Page 4-8 Xerox 495 Continuous Feed Duplex Printer Operator Guide
down list for any modification to the margins with respect to the original
configuration.
The settings can be entered in millimeters or inches by pressing the
corresponding buttons. The 0 button resets the offset to 0. The settings
made will be displayed in the Offset display to the right of the arrows.
Notebook density settings
This page displays a density cursor for both sides of the paper and is
used to set the image density for both sides. There are five density levels
which are pre-defined by the Key Operator under the Definitions >
Application > Density tab (See "Defining applications" on page 7-12).
Each press of an arrow key will step the cursor through the five pre-
defined density levels for the selected side in the direction pressed.
Notebook 2-up settings
This page of the notebook deals with 2-up printing. The 2-up printing
page is shown in the following illustration.
The 2-up choice display shows how 2-up has been defined for the
application.
If 2-up is selected, the offset can be changed in inches or in millimeters
for each side depending on the setup defined in the Application tab.
Press the required direction arrows in the appropriate Offset button to set
the offset between -0.5” and +0.5” or -0.1mm and +0.1mm.
Offset print density cursor
Two-up choice display