Filter
Top Products
DEFINING PRODUCTION JOBS DEFINING APPLICATIONS
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 7-15
9. Press the Density tab.
Each marking unit has 5 density levels, which can be set from the
Density tab.
Each of these 5 density levels has 15 contrast levels, which can also
be set from the Density tab. A contrast level of 1 is the lightest, while
a contrast level of 15 is the darkest.
In the Notebook, each density level can be preset to a particular
contrast level.
To set each density level, first press the left or right arrows on the
density level cursor.
This will highlight the corresponding contrast level cursor, with its
current setting in green.
Then, to set the contrast level, press the left or right arrows on the
contrast level cursor.
It is recommended that you set density level 1 to your lightest choice
of contrast setting, increasing the setting for each of the subsequent
density levels, and finally setting density level 5 to your darkest
choice of contrast setting.
However, while the above is recommended, the Operator should
proceed with caution. It is always possible that density level 1 is set
to a darker contrast level than density level 2 and so on. Before
making a selection from the Notebook, always note each individual