Filter
Top Products
PAPER PATH PAPER LOADING
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 5-7
6. Check that the sprocket holes of the paper are correctly inserted
onto the front tractor pins, then close the tractor covers.
7. Check that the brush is down.
8. Check that the decurler is released (on the Standard label side).
9. Check that the supplementary table lever is towards the Printing side
and the table is down.
Note: The decurler is provided for the following special situations:
a. If the paper is folded too strongly at the perforations in order to
prevent blurred printing at the perforations.
b. To prevent several sheets from being lifted together.
c. When using normal paper, release the decurler as it may
impede the paper feed.
10. Set the paper length. Press the Long button to increment the units or
the Short button to decrement the units. Press the One Decimal
button to increment the decimal place by 1/6 inch for each press.
Paper
Brush
Decurler