Filter
Top Products
DEFINING THE ATTACHMENT DEFINING PRODUCTION JOBS
Page 7-28 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Defining the attachment
There are two types of attachment, IBM Channel and TCP/IP.
Note: To define a Channel or TCP/IP attachment you must have the
User status of Key Operator or higher. To define a File attachment, you
must be a Maintenance or Support user.
An attachment definition determines the way in which the attached host
system is connected.
Creating or amending an IBM Channel attachment configuration
The Defaults for the Channel attachment configuration are as follows:
• Emulation pull-down list - IPDS
• Physical Port buttons - Channel A
• Channel Address field - 02
• Transfer Mode pull-down list - High Speed
Note: An asterisk (*) is displayed to the right of the Attachment pull-
down list for any modification made to any of the settings on the screen.
To create or amend an IBM Channel attachment:
1. Select the Definitions tab, the Attachment tab, then the Channel
tab.
The Channel screen groups the IBM Channel host connection
related settings.
2. Press the button to create a new attachment or choose an
existing Attachment from the pull-down list.