Filter
Top Products
RUNNING PRODUCTION JOBS RUNNING JOBS
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 4-13
if you go to the bubble menu and press Release when the Unwinder
is powered off, the paper will start moving and finally provoke a jam,
because it breaks or tears.
• Load or Load & Align - This action is usually performed when
installing new paper, after changing paper, or after clearing a paper
jam/break. The Load button will appear for devices that do not need
to be aligned, (folders, for example). The Load & Align button will
appear for devices that do need to be aligned, (cutters, for example).
• Print Alignment - This button will be available for all devices that
need to be aligned. The procedure requires that the whole line is in a
Ready state. It is typically used when paper has been previously
loaded but not aligned or when paper has lost alignment due to an
error or user operation for example. Pressing the button will start the
alignment procedure.
• Aligned - Once the device is aligned, you must confirm the aligned
status by pressing the Aligned button.
• Not Aligned - If the device is not aligned, you must declare the line
not aligned by pressing the Not Aligned button.
• Aligned/unjammed - This button is used to declare the
postprocessors Ready when aligned or unjammed.
• Not aligned/jammed - This button is used to declare the
postprocessors Not Ready due to misalignment or paper jam. Press
the button to perform the action.