Filter
Top Products
DEFINING A PAPER PATH DEFINING PRODUCTION JOBS
Page 7-26 Xerox 495 Continuous Feed Duplex Printer Operator Guide
The marks entry screen is displayed.
4. Press the side icon, front - or back- (see "Front and back
marking units" on page 2-2) on the lower left side of the tab window
until the appropriate side is displayed (back is shown in the
illustration above).
5. For each dimension, press the appropriate button and enter the
value using the keypad.
6. Press the Inch or the mm buttons to choose the measurement units
to be used (1 inch = 25.4mm).
7. Repeat steps 4 and 5 for the other side of the paper, if required.
8. Choose when the marks will be activated. The choices are:
• Printed on All Pages.
• Printed on Alignment Pages only.
• Printed on receipt of an AOS command from the host.
• Printed on Job Pages.
• Disabled.
9. Press to accept the details and return to the Marks tab.
10. Press the button to save the marks definition.
The Save screen containing the list of existing marks is displayed.
11. For a new marks definition, select the Write Marks As field, enter a
name for the marks using the alphanumeric keyboard and press the