Filter
Top Products
DEFINING PRODUCTION JOBS VALID PRINT AREA (VPA)
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 7-37
Valid print area (VPA)
The data will be printed centrally on the page with a margin of 0.5 inches
(12.7mm) either side. This is called the Valid Print Area (VPA).
If the page is offset in the Notebook or on the Application > Offset tab
so that the data moves into the margin, the image will be clipped.
Processing marks can be placed outside the VPA with the following
limitations
240 dpi resolution
0.5” (12.7mm)
VPA = page width - 1 inch (25.4mm)
Processing marks can be printed in this area
300/600 dpi resolution
0.187” (4.75mm)
0.213” (5.41mm)
VPA = page width - 1 inch (25.4mm)
Processing marks can be printed in this area
Example: if the page width is 18 inches (457.2mm)
then VPA is 17 inches (431.8mm)
Example: if the page width is 18 inches (457.2mm)
then VPA is 17 inches (431.8mm)
0.1” (2.54mm)
0.313” (7.95mm)
0.287” (7.29mm)
0.4” (10.16mm)
0.5” (12.7mm)
0.5” (12.7mm)
0.5” (12.7mm) 0.5” (12.7mm)
Non-print area