Filter
Top Products
PROBLEM SOLVING CLEARING PAPER JAMS
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 9-7
• Open the reflector unit for fuser B and autoloader B.
• Cut the paper before the tractors and before fuser A.
• If the paper is at fuser A, extract it from the entry of fuser A by
hand.
• If the paper is at fuser B, press the Forward switch while pulling
the paper in the direction shown and carefully extract the paper.
5. If the paper is cut completely or badly torn and cannot be transported
by the tractors, remove the paper through an opening (tractor, R
guide, transfer unit, fuser, or stacker) close to the damaged section.
As paper between the transfer unit and fuser has a non-fused area,
Autoloader B
Reflector unit
Fuser B
Fuser A
Fuser A
Autoloader B
Paper Cutting Position
Reflector Unit
Drum Unit A
Do not extract in this direction
Paper Cutting Position
Drum Unit B
Fuser B
Extract in this direction