Filter
Top Products
DEFINING PRODUCTION JOBS DEFINING A PAPER PATH
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 7-21
Defining a paper path
Note: To define a paper path you must have the User status of Key
Operator or higher.
A line definition determines the print line to be used. The print line is the
printer and the pre- and post-processing equipment used.
A line is created by dragging and dropping a representation of the device
from the selection on a pull-down list to a representation of the whole
print line. The ejection length, which is the page length multiplied by the
number of pages needed to reach the next device plus 36 inches
(914mm) between two printers for slack, is input.
The Default Line configuration is Xerox 495 Continuous Feed Duplex
Printer in stand-alone mode.
Creating or amending a print line
If any pre- or post-processing equipment is not ready, the printing system
will not be started.
To define the print line:
1. Select the Definitions tab, the Line tab, then the Paper Path tab.
The Line screen groups the devices associated with the print line
and also the ability to enter processing marks.
2. Press the button to create a new line or choose an existing
Line from the pull-down list.
3. Choose a Device from the pull-down list. A device icon is displayed
beside the pull-down list.