Filter
Top Products
Using Standard Elements Enterprise Communications Server
120 Copyright © 2009 ADTRAN, Inc. 619510003-1A
To delete a target phone number from the list for Deliver Messages
1. Select the telephone number that you want to delete.
2. Select the trash icon.
Transfer Call element
The Transfer Call element transfers calls to another number.
If the transfer fails, the caller leaves the element through the Otherwise connector pin. The UC server
automatically adds a voicemail element to the Otherwise connector pin if you do not add an element.
You can specify an account code only if the Administrator enabled the account code feature.
The telephone number that you specify is subject to the outgoing call restrictions that are specified by the
Administrator.
To specify a transfer target for the Transfer Call element
1. In the Transfer call to section, select one of the following:
• This number—if you want to specify a number to transfer callers to
• The operator—if you want to transfer callers to the operator
2. If you selected this number, do one of the following:
• Use the Value Selector to specify a value.
• Select the telephone icon, and type the number where you want to transfer the caller.
• Right-click the This number box, select New, and type the phone number that you want.
For information about selecting a dynamic value using a Value Selector, refer to
Selecting values within elements using the value selector on page 108. For information
about contact address book synchronization, refer to Synchronizing contacts on
page 108.
Trash icon
Transfer Call
element