Filter
Top Products
120
Digital Multi Effects (DME)
Chapter 1 MVS-8000 Functions
Skew
In the source coordinate space, change the skew of the image on the x-axis or
y-axis.
Graphics Display
Graphics display is a function that allows you to display wire frames,
coordinate axes and a grid over the current DME image, to make it easier to
create effects in three-dimensional coordinate space.
Graphics displayed by this function can also be output to the monitor output
connector.
Note
On the MVE-8000 and the MVE-8000A (when using the DME dedicated
interface), these graphics cannot be output to the monitor output connector.
To make graphics display settings, use the DME menu. (For details, see
“Graphics Display” in Chapter 11 (Volume 2).)
You can display the following kinds of graphics.
Wire frames
A wire frame displays an image enclosed in a frames, so that you can check the
position and size of the image. If there is a shadow (see page 157), a frame is
shown for the shadow as well.
Coordinate axes
This is a three-dimensional display of coordinates in local or global coordinate
space. You can check the origin of the axes and the directions of the x-, y-, and
z-axes.
Change of skew on x-axis
Change of skew on y-axis