Filter
Top Products
375Simple Transition
Chapter 3 Transitions
Independent key transition control block (simple type)
Carrying out a transition using a simple-type independent key
transition control block
1
Select the transition type for key 3 or key 4 using the independent key
transition type selection buttons.
To fade a key in or out: Press the [MIX] button, turning it on.
To insert or delete a key using a dedicated wipe pattern: Press the
[WIPE] button, turning it on.
To insert or delete a key using a dedicated DME wipe pattern: Press
the [DME] button, turning it on.
For details of wipe settings, see “Wipe Settings for Independent Key
Transitions” (page 455). For details of DME wipe settings, see “DME
Wipe Settings for Independent Key Transitions” (page 477).
To cut the key instantaneously in or out: Press the [CUT] button, turning
it on.
K-SS WIPE DME
SHIFT MIX CUT
KEY3
ON
TAKE
K-SS WIPE DME
SHIFT MIX CUT
KEY4
ON
TAKE
Key 3 control block Key 4 control block
Independent key transition type
selection buttons
Independent key transition
execution section
The functions of the key 3 control block and key 4 control block are the same.