Filter
Top Products
162
External Devices
Chapter 1 MVS-8000 Functions
(Standard Type)” (page 260) and “Transition Control Block (Compact
Type)” (page 310).
• Setting a start point: For each selected VTR/disk recorder/Extended VTR
you can set the start point timecode value as keyframe data.
• Setting a stop point: For each selected VTR/disk recorder/Extended VTR
you can set the stop point timecode value as keyframe data.
• Setting a start delay time: For each selected VTR/disk recorder/Extended
VTR you can set the start delay as key frame data.
• Recording to VTR or disk recorder: Record video to the selected VTR/
disk recorder.
• Loop/recue
1)
setting: You can select loop or recue as the playback mode.
These operate as follows.
When loop is selected: Playback repeats from the start to the end of the
currently recalled file.
When recue is selected: When playback reaches the stop point,
automatically cue up to the start point.
1) EVS XT server (EVS Broadcast Equipment) dedicated function
Cueup & Play
By saving the start point timecode, stop point timecode, start delay time, and
so on for a VTR, disk recorder or Extended VTR in an effect register, and
recalling this register, you can operate the following buttons in the keyframe
control block to automatically control the VTR, disk recorder or Extended
VTR.
[REWIND] button: Cue up to the start point timecode
[RUN] button: Play
With this function you can also stop the VTR, disk recorder or Extended VTR
used for playback at the stop point timecode recalled from the same register.
Disk recorder (video disk communications protocol) operation
when loop /recue is set
When loop is set: playback repeatedly between the start point and stop point.
When recue is set: when playback reaches the stop point, automatically cue
up to the start point.
VTR/disk recorder/Extended VTR timeline
For a keyframe effect controlled from the center control panel, the timeline
allows you to set a VTR, disk recorder or Extended VTR action at a keyframe
point on the timeline.
Timeline actions
The actions that can be used on the timeline are as follows.
•Start