Filter
Top Products
453Basic Procedure for Wipe Settings
Chapter 5 Wipes
3
Set the following parameters.
.
a) See page 69.
b) See page 69.
Applying barrel or pincushion distortion to the edge of the wipe
pattern (Spring)
You can set the spring function independently for the main and sub patterns.
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Press [Spring], turning it on.
3
Set the following parameters.
a) See page 71.
Applying a spiral effect to the wipe pattern (Spiral)
You can set the spiral function independently for the main and sub patterns.
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Press [Spiral], turning it on.
3
Set the following parameters.
Knob Parameter Adjustment Setting values
1 Amplitude Amplitude of modulation 0.00 to 100.00
2 Frequency Frequency of modulation 0.00 to 100.00
3 Speed Speed of waves
–100.00 to +100.00
a)
4 Shape Form of the modulation
1 to 3
b)
Knob Parameter Adjustment Setting values
1 Gain Degree of barrel distortion
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Magnitude Size and direction of the spiral
–100.00 to +100.00
a)
2 Wave Speed Speed of the lateral waves
–100.00 to +100.00
a)