Filter
Top Products
391Key Setting Operations Using Menus
Chapter 4 Keys
independently. The separate edge function is only valid when a
luminance key, linear key, or chroma key is selected as the key type.
a) In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0.00
to 4.00.
When drop border or shadow is selected: The setting parameter values
depend on the on/off setting of key drop and the selection of 4H mode/
8H mode (see page 54).
• “Key drop OFF” mode
• “Key drop ON” mode
a) In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0.00
to 4.00.
When emboss is selected:
a) The Density adjustment only affects the key edge. This can be adjusted separately from
Key Density, and if Key Density is set to 0.00, the embossed edge effect only can be
applied.
Knob Parameter Adjustment Setting values
1 Top Top edge width
0.00 to 8.00
a)
2 Left Left edge width
0.00 to 8.00
a)
3 Right Right edge width
0.00 to 8.00
a)
4 Bottom Bottom edge width
0.00 to 8.00
a)
5 Density Density 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Width Width 0.00 to 8.00
2 Position Position 359.99 to 180.00
3 Density Density 0.00 to 100.00
Knob Parameter Adjustment Setting values
1Width Width
0.00 to 8.00
a)
2 Position Position 359.99 to 0.00
3 Density Density 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Width Width 0.00 to 4.00
2 Position Position 359.99 to 0.00
3
Density
a)
Density 0.00 to 100.00