Filter
Top Products
452
Basic Procedure for Wipe Settings
Chapter 5 Wipes
a) See page 65.
Making a wipe pattern like a Venetian blind (Pairing)
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
In the <Pairing> group, select the slit direction.
H: Create slits in the horizontal direction.
V: Create slits in the vertical direction.
3
Set the following parameters.
a) See page 68.
Applying modulation to the wipe pattern (Modulation)
You can apply modulation independently to the main pattern and sub pattern.
Note
When using 1080PsF mode in an HD system, the modulation function is not
available.
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Depending on the desired effect, in the <Modulation> group select one of
the following.
H: Modulate the pattern, applying waviness in the horizontal direction to
edges.
V: Modulate the pattern, applying waviness in the vertical direction to
edges.
Fringe: Modulate the pattern, applying waviness in the radial direction to
edges.
2 Position V Vertical position of pattern
–200.00 to +200.00
a)
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Width Width of the slits 1 to 128 (integer)
2 H Offset Spacing in the horizontal direction
–100.00 to +100.00
a)
3 V Offset Spacing in the vertical direction
–100.00 to +100.00
a)