Filter
Top Products
507Still Image Operations
Chapter 7 Frame Memory
4
When you selected a pattern key or external key, if required press [Key
Invert] in the Still >Composite menu to invert the key.
Image Output
There are two functions related to image output: the reposition function for
moving the output image, and the lock function for fixing the output image.
For an overview of the image output, see page 90.
Moving the output image (reposition function)
1
In the Frame Memory menu, select VF3 ‘Reposition/Lock’ and HF1
‘Reposition.’
The Reposition menu appears. In this menu, you can also enable the V/K
mode (see page 496).
2
In the frame memory selection area, select the FM output. (See page 495.)
3
In the <Reposition> group, select the movement mode (see page 90).
Normal: Move in normal mode.
Black&White: Move in black & white mode.
4
With the knobs, adjust the parameters to move the image.
a) See page 65.
The surroundings of the moved image on the screen are filled with black.
5
To return the image moved by the reposition function to the center
position, in the <Reposition> group press [Center].
Note
It is not possible to write the image moved by the reposition function
directly to frame memory.
Knob Parameter Adjustment Setting values
1 Position H Move in horizontal direction
–200.00 to +200.00
a)
2 Position V Move in vertical direction
–200.00 to +200.00
a)