Filter
Top Products
428
Resizer
Chapter 4 Keys
Applying a wide key border
1
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press [Dual
Rszr Effect], turning it on.
2
Press [Wide Key Border], turning it on.
3
Adjust the following parameters.
a) Shared with the drop shadow “Soft” value.
4
To add an outline, press [Out Line], turning it on.
5
To adjust the border color, press [Border Color].
6
Set the color parameters.
For details, see “To apply color to a border” (page 426)
Applying a drop shadow
1
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press [Dual
Rszr Effect], turning it on.
2
Press [Drop Shadow], turning it on.
3
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
•SD format
Knob Parameter Adjustment Setting values
1 H Simultaneously adjust border
width of left and right edges
0.00 to +100.00
2 V Simultaneously adjust border
width of upper and lower edges
0.00 to +100.00
3 All Simultaneously adjust border
width of all four edges
Value of H shown
4
Soft
a)
Softness of border 0.00 to +100.00
5 Density Density of border 0.00 to +100.00