Filter
Top Products
550
Misc Menu Operations
Chapter 10 Misc Menu, Etc.
Enabling or disabling control from the editing keyboard
1
In the menu control block, press the top menu selection button [MISC],
then select VF1 ‘Enable’ and HF2 ‘Plug-In Editor.’
The Misc >Enable >Plug-In Editor menu appears.
2
In the <Control From Plug-In Editor> group, press [Editor Enable].
Each time you press the button toggles between enable and disable.
To enable control of the preview bus only
When control from the editing keyboard is disabled (when [Editor Enable] is
set to Disable), to enable control of the preview bus only, press [PVW Bus
Enable] in the <Control From Plug-In Editor> group.
Side Flag Settings
Note
The side flag function is only supported on an MVS-8000A system and MVS-
8000G system.
The term “side flags” refers to the areas to left and right of an image with aspect
ratio 4:3 embedded within a 16:9 frame, when these areas are filled with a
selected image from the utility 1 bus.
For details of the side flag function, see “Side Flags” on page 102.
Enabling and disabling side flags with a menu operation
You can enable or disable side flags for the backgrounds (A and B) of each of
the M/E and PGM/PST banks.
As an example, to enable side flags for background B row on the M/E-1 bank,
use the following procedure.
1
In the menu control block, press the top menu selection button [MISC],
then select VF1 ‘Enable’ and HF3 ‘Side Flags.’
The Misc >Enable >Side Flags menu appears.
The status area shows the buttons for Bkgd A and Bkgd B for each of the
M/E-1 to M/E-3, and PGM/PST (P/P) banks.
2
In the <M/E-1 Side Flags> group, press [Bkgd B].
Each time you press the button toggles between Enable and Disable.