Filter
Top Products
398
Key Setting Operations Using Menus
Chapter 4 Keys
• When a pattern is selected
a) The pattern is the same as a standard wipe. (See “Wipe Pattern List” in Appendix (Volume
1) (page 560).)
To select the pattern, display the Mask Ptn Select menu by pressing the
[Mask Ptn Select] button in the Main Mask menu. After selecting one of
the patterns (standard wipe patterns 1 to 24) displayed in the Mask Ptn
Select menu, you can adjust the following parameters.
5
To invert the black and white sense of the mask source, press the [Mask
Invert] button, turning it on.
6
When a pattern is selected as the mask source, set the pattern modifiers as
required.
• When turning [Position] on and setting the pattern position
a) See page 65.
• When turning [Multi] on and replicating the pattern
2 Left Left position –100.00 to +100.00
3 Right Right position –100.00 to +100.00
4 Bottom Bottom position –100.00 to +100.00
5 Soft Box softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Edge softness 0.00 to 100.00
5 Pattern Pattern number
1 to 24
a)
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Edge softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Position H Horizontal position
–200.00 to +200.00
a)
2 Position V Vertical position
–200.00 to +200.00
a)
Knob Parameter Adjustment Setting values
1 H Multi Number of repetitions of pattern
horizontally
1 to 63