Filter
Top Products
552
Misc Menu Operations
Chapter 10 Misc Menu, Etc.
At this point, if auto side flags are on, this automatically adds side flags to
the 4:3 video material. (See “Settings for Switcher Configuration (Config
Menu)” in Chapter 16 (Volume 2).)
3
Use either of the following methods to turn the side flags on.
• Use the Misc >Enable >Side Flags menu. (See page 550)
• Use a cross-point button operation. (See previous item.)
This adds side flags to the 4:3 video material.
Safe Title Settings
Switching the safe title function on or off
1
In the menu control block, press the top menu selection button [MISC] and
select VF2 ‘Safe Title.’
The Misc >Safe Title menu appears.
2
Using any of the following methods, select the signal to which the settings
apply.
• Directly press the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
Notes
• It is not possible to change the setting for the output for which the safe
title is set off in a Setup menu.
• The safe title function cannot be used for output signals for which
through mode is set to Enable in a Setup menu.
For more information about the Setup menu settings referred to above, see
“Signal Input Settings (Input Menu)” and “Signal Output Settings (Output
Menu)” in Chpater 16 (Volume 2).
3
Press [Safe Title] to set it on or off.
Knob Parameter Adjustment Setting values
1 Output Signal to which the settings
apply
1 to 48