Filter
Top Products
197Setup
Chapter 1 MVS-8000 Functions
Button assignment settings (Prefs/Utility)
Assign the [PREFS 1] to [PREFS 16] buttons in the menu control block, the
utility/shotbox control block buttons, and the cross-Point control block.
This assigns recalling frequently used menus (menu shortcuts), enabling/
disabling functions (recalling utility commands) and recalling shotbox
registers or macro registers.
• User Preference: Make the settings for the user preference buttons in the
menu control block.
• Utility Module Assign: Make the utility/shotbox control block settings.
• KEY 2/4 Bus Button Assign: Make the settings for the key 2 row buttons in
the cross-point control block.
External device connections (Device Interface)
• GPI Input: Set the GPI input ports and trigger type, and make the action
settings.
• GPI Output: Set the GPI output ports and trigger type, and make the action
settings.
• P-Bus Control: Set the control mode for P-Bus devices.
• DCU Serial Port Assign: Assign the devices (disk recorder/VTR/Extended
VTR) connected to a DCU and accessible from the control panel to the
[DEV1] to [DEV12] buttons which become operative when you press the
[DEV] button on the device control block. For a disk recorder or Extended
VTR, you can also make settings relating to sharing of file lists. Further, you
can make settings for devices (disk recorder/VTR/Extended VTR) operable
from an editing keyboard.
• Editor Port Assign: When the BZS-8050 license is valid, make settings for
the SCU editor panel port.
Operation settings (Operation)
• Button Tally: Set whether or not the system tally generation results are
reflected in the panel tally.
• Trans Rate Display: Select whether the transition rate display mode is in
frames or timecode units.
• S-Bus Name Link: Copy the S-Bus description name to the source name.
• Effect: For keyframe effects, you can make the following settings. (See
Chapter 13 “Keyframe Effects” (Volume 2).)
– Recall mode
– Automatically turning off the [EDIT ENBL] button when an effect is
recalled
– Automatic insertion of a first keyframe when an empty register is recalled
– Effect Auto Save
– Default KF Duration
– Setting whether or not to replay the first keyframe after rewinding a GPI/
P-Bus/disk recorder/VTR/Extended VTR/Macro effect