Filter
Top Products
469Basic Procedure for DME Wipe Settings
Chapter 6 DME Wipes
a) Shared with knob 3 for parameter group 2
b) The horizontal center position of the video pasted on Side V. At –100.00 the center is at the left
edge of the screen, and at +100.00 the center is at the right edge of the screen.
c) The vertical center position of the video pasted on Side V. At –100.00 the center is at the bottom
edge of the screen, and at +100.00 the center is at the top edge of the screen.
a) Shared with knob 3 for parameter group 1
b) The horizontal center position of the video pasted on Side H. At –100.00 the center is at the left
edge of the screen, and at +100.00 the center is at the right edge of the screen.
c) The vertical center position of the video pasted on Side H. At –100.00 the center is at the bottom
edge of the screen, and at +100.00 the center is at the top edge of the screen.
Selecting a DME wipe pattern in the Flexi Pad control block
In the standard type Flexi Pad control block, enter a 4-digit pattern number,
using the [DME] button.
For details, see “Selecting a wipe pattern in the Flexi Pad control block” (page
440).
Note
You cannot select a DME wipe pattern in the simple type Flexi Pad control
block.
Setting DME Wipe Modifiers
You can apply various modifiers to the DME wipe pattern: setting the DME
wipe direction, pattern position, and so on.
5 Side V Center Y Side V vertical center
position
–100.00 to +100.00
c)
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Side H Size X Side H horizontal
magnification
0.01 to 8.00
2 Side H Size Y Side H vertical
magnification
0.01 to 8.00
3 Height Height of brick
0.01 to 100.00
a)
4 Side H Center X Side H horizontal center
position
–100.00 to +100.00
b)
5 Side H Center Y Side H vertical center
position
–100.00 to +100.00
c)
Knob Parameter Adjustment Setting values