Filter
Top Products
224
Color Corrector
Chapter 1 MVS-8000 Functions
It is also possible to mask part of the region to be corrected.
Secondary color correction
For the six colors R (red), G (green), B (blue), Y (yellow), C (cyan), and M
(magenta), adjust the luminance and saturation, and also the hue within a range
of ±30 degrees of the center value for each color.
You can mask a part of the region to be corrected.
Note
This function is disabled when spot CCR is enabled with a setup setting. For
details, see “Installation and Device Setup (Install/Unit Config Menu)” in
Chapter 16 (Volume 2).
On the MVS-8000G, this function and spot CCR can be enabled at the same
time.
RGB clip
For each of the R, G, and B signals, you can make dark clip and white clip
adjustments.
Luminance processing
After converting a signal to which RGB color correction has been applied to a
YUV signal, dividing the luminance levels into three regions, referred to as
Output level
Black balance adjustment
White balance adjustment
Input level
Unadjusted signal
Input level
Output level
Knee correction
Gamma
correction
Adjusted signal