Filter
Top Products
553Misc Menu Operations
Chapter 10 Misc Menu, Etc.
Displaying a List of Transition Rates and Changing the
Settings
In the Transition menu, for each bank you can display a list of the M/E (or
PGM/PST) transition rates and independent key (or DSK) transition rates, and
change the settings.
These settings are linked to the other transition rate setting operations.
You can also display and set the fade-to-black transition rate.
Displaying the Transition menu
In the menu control block, press the top menu selection button [MISC], then
select VF3 ‘Transition.’
The Misc >Transition menu appears.
About the Transition menu display
The display of the independent key transition rate in the Misc >Transition
menu depends on the selection in the <Key Transition> group of the
Engineering Setup >Switcher >Transition menu for each of the M/E and PGM/
PST banks.
When [Same] (On direction and Off direction settings the same) is selected
in the <Key Transition> group: Only “Key” (or “DSK” in the PGM/PST
bank) appears.
When [Independ] (On direction and Off direction settings independent) is
selected in the <Key Transition> group: “Key(On)” and “Key(Off)”
each appear. In the case of the PGM/PST bank, “DSK(On)” and
“DSK(Off)” appear.
For more details, see “Settings Relating to Video Switching (Transition
Menu)” in Chapter 16 (Volume 2).
Setting the transition rate in the Transition menu
For example, to make the settings for the M/E-1 bank, use the following
procedure.
To set the M/E transition rate
1
In the <M/E-1 Transition Rate> group of the Misc >Transition menu, press
[Transition].
2
Turn the knob to set the number of frames.