Filter
Top Products
517Frame Memory Clip Operations
Chapter 7 Frame Memory
To specify the playback stop point
Start playback, and at the desired position press the [STOP] button to stop
playback, then press the [STOP TC] button. To set to any position, press the
[SET STOP TC] button, and enter a timecode from the numeric keypad control
block.
To carry out the variable speed playback
Use the search dial.
For details on using the search dial, see “Controlling the Tape/Disk
Transport” in Chapter 12 (Volume 2).
To apply a loop to a frame memory clip
Press the [LOOP] button.
Using the device control block (trackball) or device control block
(joystick) to play back clips
Carry out the following operation with the device control block (trackball) or
device control block (joystick).
Note
A frame memory clip must first be recalled with a menu operation.
1
Press the [DEV] button in the region selection buttons, and select the frame
memory clip for playback (FM1 CLIP to FM8 CLIP).
If the pair mode is on, both main and subsidiary FMs light.
2
Press the [PLAY] button, turning it on.
To stop playback, press [STOP] or any of the [SHTL], [JOG], [CUE],
[REW], [FF], and [ALL STOP] buttons.
For details of the buttons in the device control block (trackball) or device
control block (joystick), see “Device Control Block (Trackball)” (page 271) in
Chapter 2.
For details of the playback start point, stop point, and duration settings, see the
previous item, “Using the device control block (search dial) to play back clips”
(page 516).
To carry out the variable speed playback
Press any of the [SHTL], [JOG], and [VAR] buttons, then turn the Z-ring or
move the joystick. The image changes in the forward direction when you turn
the Z-ring clockwise, and in the reverse direction when you turn it