Filter
Top Products
325Basic Menu Operations
Chapter 2 Menus and Control Panel
This returns the settings within the
function grouping to the default state,
and the [Default Recall] button goes
off.
Note
The default state of the settings depends on
the setting of the initial status mode, set in
the Setup menu of system setup, as follows.
User: The state when [Initial Status Define]
is executed.
Factory: Factory default settings
Returning knob parameters to
default state
1
Press the [Default Recall] button,
turning it on.
This enters the menu default recall
mode.
2
Press the knob parameter button you
want to return to the default state.
This returns the knob parameter value
to the default state, and the [Default
Recall] button goes off.
Notes
• In the following table, “Menus allowing a
return to default settings,” the default
recall function does not apply to some
knob parameters. For details, see the
table, “Knob parameters subject to
restriction on default recall” on page 328.
• The default recall function does not
return the horizontal (H) and vertical (V)
position settings to their default state
individually. Returning the horizontal
(H) position to its default state also
returns the vertical (V) position to its
default state automatically, and vice
versa. For details, see the table, “Knob
parameters subject to restriction on
default recall” on page 328.
Menus allowing a return to default settings
Top menu selection button
name
VF number
(HF number)
Menu number Menu name
M/E1 VF1 1110-series
Key1
a)
VF2 1120-series
Key2
a)
VF3 1130-series
Key3
a)
VF4 1140-series
Key4
a)
VF5 1150-series
Wipe
a)
VF6 1160-series
DME Wipe
a)
VF7 1170-series
Misc
a)