Filter
Top Products
307Names and Functions of Parts of the Control Panel
Chapter 2 Menus and Control Panel
SHIFT: When setting is made in the Setup
menu to allow a different transition
type for inserting or deleting a key, it is
possible to display and set the
transition after the next transition while
this button is held down.
c Independent key transition
execution section
DSK1 (downstream key 1) ON to DSK4
ON buttons: Press these to
instantaneously cut the downstream
keys 1, 2, 3, and 4 in or, when the
downstream keys are already inserted,
cut them out. When the key
corresponding to the button appears in
the final program output, the button
lights red, and otherwise lights amber.
TAKE buttons: These correspond to
downstream keys 1, 2, 3, and 4 from
left to right; press to execute an auto
transition. The transition starts
immediately, and the button lights
amber. When the transition completes,
the button goes off.
Fader lever: Move this to carry out a
manual downstream key transition.
Transition indicator: This comprises
multiple LEDs, which show the
progress of the downstream key
transition.
d Key snapshot setting buttons
K-SS (key snapshot): This enables key
snapshot mode.
K-SS STORE (key snapshot store): To
save a key snapshot, hold down this
button, and press the key source name
display/key snapshot button for the
register you want to save.
UNDO (key snapshot recall undo): This
undoes the last key snapshot recall.
e Key source name display/key
snapshot buttons
These display the selected source name for
each corresponding keyer. In snapshot
mode, they correspond to registers 1 to 4 of
the selected keyer, and pressing the button
saves or recalls a key snapshot.