Filter
Top Products
523Frame Memory Clip Operations
Chapter 7 Frame Memory
• On the MVS-8000A playing back ancillary data is only possible for FM1,
FM3, FM5, and FM7. For FM2, FM4, FM6, and FM8, ancillary data cannot
be played back. On the MVS-8000G there are no such restrictions.
• For loop playback of clips in the following video formats, the loop playback
range must be at least 5 frames, and set to a multiple of 5 frames.
– 480/59.94i
– 720/59.94P
– 1080/59.94i
– 1080/29.97PsF
• Recalling operations of still images or clips can cause noise.
• Carrying out file operations on a frame memory clip may result in the
ancillary data being discontinuous, or in noise occurring. However, if the
first or last frame of the clip is deleted, noise will not occur.
• The audio sampling frequency is always 48 kHz.
• When you play back the recorded embedded audio, depending on the device
to be used, noises are produced at the playback start point and end point. For
details of devices that are used for playback, contact your Sony service or
sales representative.
1
In the Frame Memory menu, select VF2 “Clip”, HF5 “Ancillary Enable.”
2
Select the frame memory folder and file to be played back.
3
Set the [Ancillary Enable] button to On.