Filter
Top Products
290
Names and Functions of Parts of the Control Panel
Chapter 2 Menus and Control Panel
i Source name displays
These show the names of the source signals
which can be selected by the cross-point
buttons. While the [SHIFT] button is
enabled, the shifted signal name is
displayed. If a different bus is allocated to
the 2nd row, while the [2ND] button is held
down, the 2nd row signal name is
displayed.
While the [KEY] button is held down, the
source name of the key signal assigned to
the cross-point buttons appears.
j SHIFT button
While this button is enabled, the shifted
signal names appear in the source name
display. Pressing this buttons toggles the
source name display between the shifted
signal names and unshifted signal names.
In the case of a module without source
name displays, this button is invalid.
k RTR (router) button
Press this button, turning it on, to assign the
auxiliary bus control block to router
control.
For details of the names and functions of
parts for router control, see the next
section.
l Level selection buttons
Used when the auxiliary bus control block
is carrying out router control.