Filter
Top Products
438
Basic Procedure for Wipe Settings
Chapter 5 Wipes
Basic Procedure for Wipe Settings
You carry out wipe setting operations principally using the Wipe menu for each
of the M/E-1 to M/E-3 and PGM/PST banks.
This section describes the basic procedures for wipe settings, taking the M/E-
1 >Wipe menu as an example.
For details of independent key transition wipe settings, see “Wipe Settings for
Independent Key Transitions” (page 455).
Wipe Settings Menu
Accessing the wipe settings menu
To access the M/E-1 >Wipe menu, use any of the following operations.
• In the menu control block, select the top menu selection button [M/E 1], and
press VF5 ‘Wipe.’
• In the transition control block of the M/E-1 bank, press the transition type
selection button [WIPE] twice in rapid succession.
• In the Flexi Pad control block of the M/E-1 bank, press the [WIPE] button
twice in rapid succession.
Any of the above operations displays the M/E-1 >Wipe menu.
Wipe Pattern Selection
You can select a wipe pattern in the Wipe menu, or by entering a pattern
number from the Flexi Pad control block.
For how to use the Flexi Pad control block, see “Selecting a wipe pattern in
the Flexi Pad control block” (page 440).
Selecting a wipe pattern by a menu operation
1
In the M/E-1 >Wipe menu, select HF1 ‘Main Pattern.’
The Main Pattern menu appears.
2
Select the wipe pattern group with the pattern group selection button.
Standard: standard wipes