Filter
Top Products
501Still Image Operations
Chapter 7 Frame Memory
3
If [Direct Recall] is on, press and turn it off.
4
Select the desired folder in the folder selection area.
By pressing [More] to switch the display, you can select from a maximum
of 12 folders.
Thumbnails of the files within the selected folder appear.
5
Using the arrow keys or turning the knob, scroll the file thumbnail display.
6
Press the thumbnail of the clip you want to recall.
7
Press [Recall].
This recalls the still image file, which is assigned to the FM you selected
in step 2.
To recall in direct recall mode
Direct recall means that pressing a thumbnail immediately recalls the file.
In this mode, only the front thumbnail file is recalled.
1
In step 7 above, instead of pressing [Recall], press [Direct Recall].
2
Press the thumbnail for the file you want to recall.
This immediately recalls the file.
To display the subsidiary file in front
With the direct recall mode on, press [Sub Display], turning it on.
Inverting the Field Polarity of a Saved Still Image (Field
Invert Function)
Note
This function is valid when the signal format is HD (excluding 720P).
However, it is not valid if the frame memory saving mode is set to “save with
ancillary data.”
Knob Parameter Adjustment Setting values
1 Scroll Thumbnail display
scrolling
1 and upwards